How our cylinders, pumps and bolting tools are typically used on site. These are representative scenarios for reference — not specific customer projects.
INFRASTRUCTUREReference setup for lifting a bridge span or heavy structure at several points at once using double-acting cylinders and a PLC-controlled split-flow pump, so bearings can be replaced while the deck stays level.
INFRASTRUCTUREReference setup for tightening many large studs on a pressure-vessel or turbine flange at the same time with 1500 Bar hydraulic bolt tensioners, giving even preload around the joint.
INFRASTRUCTUREReference setup for opening, aligning and leveling large tower or foundation flanges with hydraulic flange spreaders, wedges and low-height lock-nut cylinders.
INFRASTRUCTUREReference setup for separating and re-aligning high-pressure heat exchanger flanges during maintenance shutdowns using hydraulic flange spreaders and alignment tools.
