Homechevron_rightProductschevron_rightAluminum Lightweight Cylinderschevron_rightHSC-LNA Series Lightweight Aluminum Lock-Nut Cylinders

HydraStark HSC-LNA Series Lightweight Aluminum Lock-Nut Cylinders - product photo 1

zoom_in 700 BAR RATED

FACTORY DIRECT20 - 150 Metric Ton

HSC-LNA Series Lightweight Aluminum Lock-Nut Cylinders

Single-acting spring-return lightweight aluminum lock nut cylinders rated for 700 Bar (10,000 PSI), engineered for sustained mechanical load holding, bridge maintenance, and structural leveling across 20 to 150 Ton capacities.

check_circle

CAPACITY RANGE:20 - 150 Metric Ton

check_circle

STROKE RANGE:50 - 250 mm

check_circle

MAX WORKING PRESSURE:700 Bar (10,000 PSI)

check_circle

ACTING & RETURN TYPE:Single-Acting, High-Strength Return Spring

check_circle

LOAD HOLDING MECHANISM:Threaded Mechanical Lock Nut for Sustained Load Holding

check_circle

CYLINDER MATERIAL:High-Strength 7075-T6 Aluminum Alloy with Hard-Coat Finish

check_circle

BASE & SADDLE PROTECTION:Removable 6mm Hardened Steel Base Plate & Grooved Saddle Standard

check_circle

OPTIONAL SADDLE UPGRADE:CATS Series 0-5° Swivel Tilt Saddles

sync_altOEM Cross-Reference:Enerpac RACL Series

View Directoryarrow_forward

Engineering Overview & Structural Features

The HSC-LNA Series Lightweight Aluminum Lock-Nut Cylinders provide fail-safe mechanical load holding with unmatched job-site portability, forged from ultra-high-yield 7075-T6 aerospace aluminum alloy to deliver over 50% weight reduction compared to conventional steel jacks. Rated for 700 Bar (10,000 PSI) working pressure across 20 to 150 Metric Ton capacities, these cylinders allow hydraulic pressure to be completely released once the mechanical lock nut is threaded down against the body, safely securing loads indefinitely during structural bridge rehabilitation, building leveling, and long-term machinery foundation support.

CORE ENGINEERING ARCHITECTURE & TECHNICAL SPECIFICATIONS

POSITIVE MECHANICAL LOCK NUT HOLDING

Threaded aluminum lock nut mechanically locks the extended piston in position, enabling indefinite, fail-safe load holding without hydraulic pressure to protect against line punctures, valve leakage, or power interruptions.

COMPOSITE BEARINGS & HARD-COAT ANODIZING

High-performance composite guide bearings prevent internal galling and boost side-load resistance up to 5%. Deep Hard-Coat anodized treatment on all body surfaces provides extreme wear resistance and offshore corrosion defense.

STEEL BASE DEFENSE & HARDENED SADDLE

Equipped standard with a removable 6mm hardened steel base protection plate and bolt-on grooved hardened steel saddle to protect lightweight aluminum components from job-site point-load indentation and substrate gouging.

INTEGRAL STOP RING & FAST RETRACTION

Integral stop ring withstands full cylinder rated tonnage to prevent plunger over-travel. Heavy-duty return spring provides fast retraction, paired with standard ergonomic transport handles and ASME B30.1 compliance.

OPTIONAL TILTING SADDLE & STEEL BASE PLATE SPECIFICATIONS

Optional Tilting Saddle Matrix (CATS Series, 0° - 5°)

Cylinder Model	Saddle Model	Diam. J1 (mm)	Protrusion K1 (mm)
HSC-LNA-20/30 Series	CATS30	55	11
HSC-LNA-60 Series	CATS50	71	14
HSC-LNA-100 Series	CATS150	97	19
HSC-LNA-150 Series	CATS200	126	18

* CATS tilt saddles dynamically articulate up to 5 degrees to eliminate lateral scoring caused by non-concentric loading.

Base Steel Plate Mounting Dimensions (6mm Plate)

Cylinder Model	Bolt Circle U (mm)	Thread V	Depth Z (mm)
HSC-LNA-20 (20 Ton)	70	M6	12
HSC-LNA-30 (30 Ton)	80	M6	12
HSC-LNA-60 (60 Ton)	110	M6	12
HSC-LNA-100 (100 Ton)	150	M10	12
HSC-LNA-150 (150 Ton)	200	M10	12

* Hardened 6mm steel base plate protects lightweight aluminum cylinder bases from abrasive site gouging.

ENGINEERING DIMENSIONAL BLUEPRINT & SCHEMATIC

HSC-LNA Series Lightweight Aluminum Lock-Nut Cylinder CAD Blueprint

        A: Closed Height
        B: Extended Height
        D: Outside Diameter
        E: Cylinder Bore
        F: Plunger Diameter & Thread
        H: Base to Advance Port
        J: Saddle Diameter
        K: Saddle Protrusion
        S: Lock Nut Height
        U: Bolt Circle
        V: Thread Size
        Z: Thread Depth
      

OEM DIRECT INTERCHANGEABLEDIMENSIONALLY INTERCHANGEABLE

OEM Cross-Reference & Dimensional Interchangeability

View Complete Cross-Reference Directoryarrow_forward

VERIFIED MODEL DIRECT REPLACEMENT

HYDRASTARKHSC-LNA Series

sync_alt

OEM BENCHMARKEnerpac RACL SeriesCOMPARABLE SPECIFICATION

View Directoryarrow_forward

Direct Drop-in Replacement for OEM SKUs:

Enerpac®, SPX Flow®, Power Team®, Simplex®, Hytorc®, Holmatro® and other brand names are registered trademarks of their respective owners. HydraStark is an independent manufacturer and is not affiliated with, authorized or endorsed by these companies. OEM model numbers are listed for dimensional and specification reference only; please verify fit with our engineers before ordering.

speed

CAPACITY RANGE

20 - 150 Metric Ton

tune

STROKE RANGE

50 - 250 mm

architecture

MAX WORKING PRESSURE

700 Bar (10,000 PSI)

Specifications

ALL MEASUREMENTS IN METRIC

Model	Capacity Ton (kN)	Stroke mm	Effective Area cm2	Oil Capacity cm3	Closed Height (A) mm	Extended Height (B) mm	Outside Diam. (D) mm	Thread Size (E)	Base to Port (H) mm	Saddle Diam. (J) mm	Lock Nut Height (S) mm	Weight Kg
HSC-LNA-202	20 (218)	50	31.2	156	239	289	85	Tr 50 x 4	27	40	40	4.9
HSC-LNA-204	20 (218)	100	31.2	312	289	389	85	Tr 50 x 4	27	40	40	5.4
HSC-LNA-206	20 (218)	150	31.2	468	339	489	85	Tr 50 x 4	27	40	40	5.9
HSC-LNA-208	20 (218)	200	31.2	624	389	589	85	Tr 50 x 4	27	40	40	6.4
HSC-LNA-2010	20 (218)	250	31.2	780	439	689	85	Tr 50 x 4	27	40	40	6.9
HSC-LNA-302	30 (309)	50	44.2	221	251	301	100	Tr 60 x 4	32	40	45	6.8
HSC-LNA-304	30 (309)	100	44.2	442	301	401	100	Tr 60 x 4	32	40	45	7.5
HSC-LNA-306	30 (309)	150	44.2	663	351	501	100	Tr 60 x 4	32	40	45	8.2
HSC-LNA-308	30 (309)	200	44.2	884	401	601	100	Tr 60 x 4	32	40	45	8.9
HSC-LNA-3010	30 (309)	250	44.2	1105	451	701	100	Tr 60 x 4	32	40	45	9.7
HSC-LNA-502	50 (496)	50	70.9	354	236	286	130	Tr 80 x 4	30	50	50	10.1
HSC-LNA-504	50 (496)	100	70.9	709	286	386	130	Tr 80 x 4	30	50	50	11.3
HSC-LNA-506	50 (496)	150	70.9	1063	336	486	130	Tr 80 x 4	30	50	50	12.6
HSC-LNA-508	50 (496)	200	70.9	1417	386	586	130	Tr 80 x 4	30	50	50	13.2
HSC-LNA-5010	50 (496)	250	70.9	1771	436	686	130	Tr 80 x 4	30	50	50	14.5
HSC-LNA-1002	100 (1002)	50	143.1	716	296	346	180	Tr 110 x 6	46	94	75	21.9
HSC-LNA-1004	100 (1002)	100	143.1	1431	346	446	180	Tr 110 x 6	46	94	75	24.2
HSC-LNA-1006	100 (1002)	150	143.1	2147	396	546	180	Tr 110 x 6	46	94	75	26.5
HSC-LNA-1008	100 (1002)	200	143.1	2863	446	646	180	Tr 110 x 6	46	94	75	28.8
HSC-LNA-10010	100 (1002)	250	143.1	3578	496	746	180	Tr 110 x 6	46	94	75	31.1
HSC-LNA-1502	150 (1589)	50	227.0	1135	323	373	230	Tr 140 x 6	51	113	80	32.2
HSC-LNA-1504	150 (1589)	100	227.0	2270	373	473	230	Tr 140 x 6	51	113	80	36.2
HSC-LNA-1506	150 (1589)	150	227.0	3405	423	573	230	Tr 140 x 6	51	113	80	40.2
HSC-LNA-1508	150 (1589)	200	227.0	4540	473	673	230	Tr 140 x 6	51	113	80	44.2
HSC-LNA-15010	150 (1589)	250	227.0	5675	523	773	230	Tr 140 x 6	51	113	80	48.2

HSC-LNA Series · 25 MODELS LISTED

CAPACITY RANGE: 20 - 150 Metric Ton

Required System Components

PUMPS

HPM-P Series Hand Pump

700 BAR · TWO-SPEEDView Specs

HOSES

HSH Series High-Pressure Hose

700 - 2800 BARView Specs

MONITORING

HSG Series Pressure Gauge

0 - 1600 BAR · CLASS 1.0View Specs

FITTINGS

HQC Series Quick Couplers

700 - 1400 BAR · 3/8" NPTView Specs

SELECTION & PROCUREMENT

Frequently Asked Questions

How does the HydraStark HSC-LNA compare with the Enerpac RACL?

expand_more

The HydraStark HSC-LNA range (HSC-LNA Series Lightweight Aluminum Lock-Nut Cylinders) is positioned as an alternative to the Enerpac RACL (OEM part numbers such as RACL-202, RACL-302, RACL-502, RACL-1002). Enerpac is a registered trademark of its owner; the reference is provided for dimensional and technical comparison only. Mounting dimensions, ratings and interfaces are listed in the specification table on this page — please confirm them against your existing equipment, or send us your OEM part number and our engineers will check compatibility before you order.

What are the key specifications of the HSC-LNA?

expand_more

Capacity Range: 20 - 150 Metric Ton; Stroke Range: 50 - 250 mm; Max Working Pressure: 700 Bar (10,000 PSI); Acting & Return Type: Single-Acting, High-Strength Return Spring; Load Holding Mechanism: Threaded Mechanical Lock Nut for Sustained Load Holding. Full specifications and dimensions are given in the specification table below.

Which models are available in the HSC-LNA series?

expand_more

The specification table lists 25 models: HSC-LNA-202, HSC-LNA-204, HSC-LNA-206, HSC-LNA-208, HSC-LNA-2010, HSC-LNA-302, HSC-LNA-304, HSC-LNA-306, HSC-LNA-308, HSC-LNA-3010, HSC-LNA-502, HSC-LNA-504, …. For non-standard requirements, please describe them in the inquiry form.

How is the HSC-LNA tested before shipping?

expand_more

Each unit is tested at 125% of its rated pressure before shipping (700 Bar rated, 875 Bar test pressure). This is above the 100% rated-load test required by ASME B30.1.

What are the lead time, warranty and shipping options for the HSC-LNA?

expand_more

Lead time is typically 2–3 business days when the model is in stock and 7–35 business days otherwise. Warranty is 12 months after receipt of goods. Shipping is available by sea freight, air freight or international express (DHL, FedEx, UPS). Send your requirements through the inquiry form for an exact quotation and delivery date.